|
gil
|
|
Joined: 22 Mar 2008
Posts: 9
Mon 24 Mar 2008
Location: Marseille
|
| Help me! |
 |
Hello Bruno,
I have some questions about the results of my research.
Here is my request and the result: (smart intelligent OR) AND sensor, 2010 patents found with this request
Q1: Why the bar at the bottom, there is written "D / I Patents: 2010/11095". Can you explain?
Q2: Using the menu "patent analysis" on the left by selecting their depositors the firt results have no flag of countries while the origin appears in the description of patents
Q3: during an operation of another search I used a first combination of words "AND smart sensor" (609) I then placed in a group 1 so that it can carry out a search 2nd (Add patents ) with the words "AND intelligent sensor" (1700) that I wanted to select a second group: The problem is that if the selection is not done with activated "Patent Analisys" this manipulation (plante) Mathéo Patent
Thank you for your responses,I remain at your listening for more precision.
__________________________________________________________
bonjour Bruno,
j'ai quelques interrogations à propos des résultats de ma recherche.
voici ma requete et le resultat: (smart OR intelligent) AND sensor, 2010 brevets trouvés avec cette requete
Q1: pourquoi dans la barre du bas, il y a ecrit "D/I Patents : 2010/11095" . pouvez vous m'expliquer?
Q2: En utilisant le menu "patent analysis", sur la gauche en selectionnant les deposants les premiers resultats n'ont pas de drapeau de pays alors que l'origine apparait dans la description des brevets
Q3: lors d'une exploitation d'une autre recherche j'ai utilisé une 1ere combinaison de mots "smart AND sensor" (609) que j'ai ensuite regroupé dans un 1er groupe de manière à pouvoir effectuer une 2nde recherche (Add patents) avec les mots "intelligent AND sensor" (1700) que j'ai voulu selectionner pour faire un second groupe: Le probleme c'est que si la selection n'est pas fait en ayant activé "Patent Analisys", cette manipulation plante Mathéo Patent
Merci pour vos réponses je reste à votre ecoute pour plus de precision.
Gilles
_________________
Comonfé? |
|
|
    |
|
Back to top |
|
Mannina
Site Admin
|
|
Joined: 06 Jan 2005
Posts: 978
Mon 24 Mar 2008
Location: Marseille
|
|
|
Hello Gilles,
| Quote: | Q1: Why the bar at the bottom, there is written "D / I Patents: 2010/11095". Can you explain?
|
The exact text is Downloaded Patents for D/L. The first number shows the number of patents that are in local database (already downloaded).
The second number shows the total number of patents including family members (downloaded AND not downloaded).
i.e : one patent downloaded with 5 patents in the family will be written:
D/L : 1/5
| Quote: | Q2: Using the menu "patent analysis" on the left by selecting their depositors the firt results have no flag of countries while the origin appears in the description of patents
|
It's very strange ? The only example where country is not provide in MP is for patents downloaded from uspto database that have the state and not the country.
Can you give me an example that you see in the description ?
Where did you give the information of the country ?
| Quote: | | Q3: during an operation of another search I used a first combination of words "AND smart sensor" (609) I then placed in a group 1 so that it can carry out a search 2nd (Add patents ) with the words "AND intelligent sensor" (1700) that I wanted to select a second group: The problem is that if the selection is not done with activated "Patent Analisys" this manipulation (plante) Mathéo Patent |
Hum...have you found a bug...
I will check that asap.
_________________
Regards / Cordialement
Bruno Mannina
Technical Support / Support Technique |
|
|
 |
|
Back to top |
|
gil
|
|
Joined: 22 Mar 2008
Posts: 9
Tue 25 Mar 2008
Location: Marseille
|
| help again plz |
|
Hi Bruno,
To illustrate the Q2, here is an image. Why do applicants have not flag and why MP shows "None" for them while in describing their origin appears?
Link :http://vti.lenul.com/index.php
___________________________________________________________
Salut Bruno,
Pour illustrer la Q2, voici une image. Pourquoi les applicants n'on pas de drapeau et pourquoi MP affiche "None" pour eux alors que dans la description leur origine apparait? voici un lien où j'ai mis une illustration: http://vti.lenul.com/index.php
Merci
Gilles
_________________
Comonfé? |
|
|
| |
|
Back to top |
|
Mannina
Site Admin
|
|
Joined: 06 Jan 2005
Posts: 978
Tue 25 Mar 2008
Location: Marseille
|
|
|
Hi Gilles,
I understand now what is the problem. There is no error, in fact "Applicant"="None" represents patents where the field is empty.
So, when you click on this item on Patent Analysis Tab, you have also the main patent of the family of the item.
See members, I'm sure that you will found a patent with Applicant=None and Country="--"
_________________
Regards / Cordialement
Bruno Mannina
Technical Support / Support Technique |
|
|
| |
|
Back to top |
|
gil
|
|
Joined: 22 Mar 2008
Posts: 9
Tue 25 Mar 2008
Location: Marseille
|
| Ok thx |
|
Hi Bruno
Merci Bien pour la réponse (je me doutais bien qu'il y avait une question de champs vide sans rapport avec MP)
Gilles
_________________
Comonfé? |
|
|
| |
|
Back to top |
|
Mannina
Site Admin
|
|
Joined: 06 Jan 2005
Posts: 978
Tue 25 Mar 2008
Location: Marseille
|
|
|
You're welcome 
---
Pas de quoi
_________________
Regards / Cordialement
Bruno Mannina
Technical Support / Support Technique |
|
|
| |
|
Back to top |
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Register
FAQ
Usergroups
Search
